FAST QUOTES · FAST SHIPPING · LESS DOWNTIMEFor owner-operators, contractors & fleets

Aftermarket Caterpillar Track Pins & Bushings

Get a fast quote for Caterpillar track pins & bushings. Use the chain assembly identification and joint design as the cross-reference starting point. A pin example from a large dozer and a bushing example from another family should never be combined merely because both appear on a CAT parts page. Review stock and shipping options for your repair.

Request A Quote

Aftermarket Caterpillar Track Pins & Bushings

Dozer Undercarriage supplies aftermarket Caterpillar track pins & bushings for replacement work on an identified CAT assembly. The track pin and bushing set components form the articulating joints of an identified track chain and its sealing arrangement. CAT joint repairs require a matched pin-and-bushing scope for the fitted chain. A visible pin size alone cannot establish which pieces the press shop should install. We quote the replacement to the OEM reference and the fitted mounting interfaces, with the required side, count, and supplied contents stated clearly.

Supporting Components

  • Track pins
  • Joint bushings
  • Link press-fit interfaces
  • Joint seals and thrust pieces where used
  • Lubrication provision for the fitted design
  • Master-area components specified separately

Caterpillar Track Pins & Bushings Replacement Options

For CAT replacement work, ask us to price individual joint components, counted repair sets, and joint service considered against complete chain replacement. Base the supply scope on inspection findings and compare joint service on a usable chain versus renewing an assembly with wider wear. The quote should distinguish the pin, bushing, seal, and press-work quantities for the same identified chain. A direct replacement has to agree with the interfaces needed for the retained components; an alternative arrangement needs its changed pieces identified. That distinction matters when comparing a local repair with a larger renewal.

Sample OEM References For Caterpillar Track Pins & Bushings

OEM references 6Y-1579, 108-0944 provide starting points for this CAT category. Read each description for its documented assembly scope and compare it with the fitted part. Send the reference you actually need replaced; the table is an identification aid, not a blanket compatibility list for every Caterpillar dozer.

Sample OEM References For Track Pins & Bushings — Caterpillar
ManufacturerOEM NumberPart Description
Caterpillar6Y-1579Track pin, 57.23 mm outside diameter and 304.15 mm length. Joint pin for example D10-family track assemblies.
Caterpillar108-0944Fixed track bushing. Joint bushing for example D4H, D5M, and D5N track assemblies.

Direct Replacement Compatibility For Caterpillar Track Pins & Bushings

A CAT OEM cross-reference should be followed by an interface check: pin and bushing dimensions, joint design, link fit, sealing pieces, and installed chain reference. Use the chain assembly identification and joint design as the cross-reference starting point. A pin example from a large dozer and a bushing example from another family should never be combined merely because both appear on a CAT parts page. The aftermarket replacement is selected for the identified OEM application. Confirm the supplied brand, assembly description, and retained mating pieces in the proposal; identical appearance is not sufficient evidence of a direct fit.

Choosing Caterpillar Track Pins & Bushings For Your Repair

Start the CAT selection with the complete CAT model, serial prefix and number, undercarriage arrangement, and any replacement-chain identification. Then inspect internal joint wear, external bushing wear, rail condition, and the suitability of retained links. Have the press shop assess joint and rail condition before parts are selected. A joint rebuild should follow the chain’s applicable construction and service method. Send clear existing-part photos and the required side or location where applicable. Those details let us review the aftermarket match and scope together, without guessing from a short model label or asking the workshop to make the replacement fit after it arrives.

Order Caterpillar Track Pins & Bushings With Fast Quotes And Shipping

Request a fast CAT quote with the identified track pins & bushings, OEM references, quantities, delivery ZIP code, and needed-by date. Include joint counts, seal availability, the complete repair set, and the scheduled press-shop date in the shipping discussion. We focus on fast quotes and fast shipping to reduce downtime; stock, dispatch, freight cost, and estimated delivery must be confirmed for the selected replacement. Compare the proposal with the workshop list and identify any parts needed before the machine can return to work.

Caterpillar Track Pins & Bushings Replacement: Expert Planning And Workshop Tips

For a CAT track pins & bushings replacement, organize the workshop around the agreed component list and the service information for the fitted system. Establish the repair set and available service information before the chain enters the press shop. Keep connection pieces separate from regular joint counts. A complete receiving check is easier before old pieces are scattered or heavy assemblies are lifted into position.

  1. Use appropriate press equipment and the specified assembly dimensions. Keep sealing and lubrication requirements tied to the actual joint design. For CAT work, keep the old reference and the confirmed aftermarket replacement recorded together. Have missing mounting or connection pieces resolved before the technician reaches that part of the job.

  2. Before fitting CAT replacement track pins & bushings, compare pin and bushing dimensions, joint design, link fit, sealing pieces, and installed chain reference with the confirmed part list. Keep the required mounting and connection pieces beside the main component and resolve discrepancies while the delivered assembly can be checked against the old one.

Before Returning To Work

Perform the required joint and chain checks and document the repair set. Refit and adjust the chain under its installation procedure. Before releasing the CAT dozer, confirm that all specified fasteners, support pieces, and connection details from the order have been accounted for.

Fast Quotes. Fast Shipping. Less Downtime.

Send your machine, parts list, delivery ZIP code, and needed-by date. Confirm availability and shipping options for your repair.

Get A Fast Parts Quote