FAST QUOTES · FAST SHIPPING · LESS DOWNTIMEFor owner-operators, contractors & fleets

Caterpillar D3C Series III Undercarriage Parts

Request aftermarket chains, rollers, idlers, sprockets, and shoes for a Caterpillar D3C Series III. Start with the full serial number and identify the Hystat, XL, or LGP arrangement shown by the machine and its records. Use the quote form to review direct-replacement options, fitment, and shipping.

Request A Quote

Aftermarket Parts For Your D3C Series III Dozer

A D3C Series III request needs more detail than the D3C badge. Caterpillar's archive separates Hystat, XL, and LGP listings. The installed track may also reflect earlier repairs or a conversion. Send the serial plate, wide photos of both sides, and readable component references before a replacement is selected.

Loose chains may make sense when the shoes remain serviceable. Inspect grouser height, bent plates, cracks, bolt holes, and seating surfaces. Include shoe-transfer labor and specified hardware. If rails and shoes are both worn, request assembled groups with shoe width, link count, and joining parts stated.

Identify rollers and idlers by assembly, location, and mount. Number lower rollers from front to rear, note flange form, and photograph the bolt pattern. For an idler, state whether the shop needs a wheel, supports, wear pieces, or a complete assembly.

Itemize a complete package: two chains or groups, rollers, idlers, sprockets, shoes, fasteners, and master parts. Keep adjusters, guards, guides, and frame repairs separate. Confirm fitment evidence, availability, dispatch, freight, and warranty terms before teardown.

Part Information For Your D3C Series III Quote

Provide machine identity, installed configuration, and repair scope in one request:

  • Exact D3C Series III designation, complete tractor serial, and identification-plate photo.
  • Hystat, XL, or LGP record; shoe width, track gauge, blade arrangement, and known conversions.
  • Chain markings, links per side, master connection, requested measurements, and sprocket photos.
  • OEM or replacement references, quantities, roller positions, idler supports, mounts, and component photos.
  • Loose chains or assembled groups, parts to retain, required hardware, and one-side or both-side scope.
  • Ship-to postal code, address type, unloading equipment, needed-by date, and whether the machine is down.

Mark unknown details as unknown instead of guessing. Serial records, markings, photos, and requested measurements can resolve the next check. Complete information supports a fast quote, but availability, dispatch, transit, returns, and warranty coverage need confirmation for the offered parts.

Use the Undercarriage Quote Checklist to organize your machine records, or the Track Chain Buying Guide when identifying a chain and its mating parts.

About The Caterpillar D3C Series III Bulldozer

Caterpillar's historical information identifies the D3C Series III as a small track-type tractor and lists Hystat, XL, and LGP versions. The Hystat page names the Cat 3046 engine and a dual-path hydrostatic power train with a separate circuit for each track. Those facts identify the series; they do not prove one undercarriage fits every machine.

Caterpillar D3C Series III Manufacturer Reference Details
Manufacturer ReferenceCaterpillar D3C Series III archive
Product StatusHistorical / non-current
Listed EngineCat 3046
Listed DriveDual-path hydrostatic drive on Hystat listing
Archived ArrangementsHystat, XL, and LGP
Fitment RuleConfirm serial and installed undercarriage

Reference figures describe the named series and equipment, not every machine in the family. Check the record for your own serial number and installed configuration.

Distinguishing The D3C Series III Dozer From Other D3 Models

Keep the complete Series III name. A D3C, D3C Series II, D3C Series III, D3G, or later D3 is not automatically the same application. A shared D3 name, similar shoe width, or matching nominal pitch does not establish interchange.

How To Find The Right Undercarriage Parts For Your D3C Series III

  1. Read the full model and serial from the tractor plate. Photograph every character and keep the engine number separate.
  2. Confirm Hystat, XL, or LGP from records, then compare that with installed frames, gauge, shoes, and blade.
  3. Count links and measure shoe width. Photograph the joint, markings, sprocket, roller mounts, idler supports, and both frames.
  4. Have a qualified technician inspect rails, bushings, rollers, idlers, sprockets, guidance, tensioning, and alignment.
  5. Review the quote by assembly and quantity. Confirm joining parts, hardware, retained parts, serial fitment, freight, and unloading.

D3C Series III Hystat, XL, And LGP Details Matter

Treat Hystat, XL, and LGP labels as identification clues, not universal part numbers. Start with the exact badge and serial plate, then verify the installed shoe, gauge, frame, and chain.

The Hystat drive description helps distinguish the generation, but it does not identify a roller or chain. Final fitment still depends on the tractor serial and undercarriage now fitted.

Older dozers may contain original and replacement components. A previous owner may have changed a complete system, while a later repair changed one side. Photograph both sides before treating either as standard.

If the dozer throws a track or loses tension, have the adjuster, recoil system, idler travel, guides, packed material, frame, and alignment checked with the correct service procedure.

Fast Quotes. Fast Shipping. Less Downtime.

Send your machine, parts list, delivery ZIP code, and needed-by date. Confirm availability and shipping options for your repair.

Get A Fast Parts Quote