FAST QUOTES · FAST SHIPPING · LESS DOWNTIMEFor owner-operators, contractors & fleets

Caterpillar D6G Undercarriage Parts

Request aftermarket chains, rollers, idlers, sprockets, and shoes for a Caterpillar D6G dozer. Caterpillar identifies D6G machines with an oval-track undercarriage, but the family includes different records and configurations. Send the full serial number and installed-component evidence through the quote form.

Request A Quote

Aftermarket Parts For Your D6G Dozer

Caterpillar retains a D6G equipment dashboard and separate historical information for D6G and D6G Series 2 machines. Keep the complete designation and serial visible. A commercial listing that groups D6C, D6D, D6E, and D6G components is a search lead, not proof that one assembly fits every tractor.

For chains, record links per side, master connection, shoe width and type, mounting pattern, and readable references. If the shop will reuse shoes, inspect cracks, plate straightness, grouser height, holes, and seating faces. Add transfer labor and specified hardware when comparing loose chains with assembled groups.

Map every lower and carrier roller by side and position. Note flange form and show caps, mounts, tread, guards, and idler supports. Series 2, SR, LGP, or other wording should remain attached to the machine record until the serial and physical arrangement are reviewed.

A complete package can include both track sides, rollers, idlers, drive components, shoes, master parts, and hardware. Keep adjuster, recoil, guard, guide, or frame repair separate. Confirm fitment, availability, dispatch, freight, returns, and warranty terms for the approved scope.

Part Information For Your D6G Quote

Provide the D6G generation, installed oval-track system, and delivery requirements:

  • Complete D6G designation, including Series 2, SR, LGP, or other recorded wording, full serial, and plate photo.
  • Track arrangement, shoe width and grouser type, gauge when requested, blade, and known conversions.
  • Chain markings, links per side, master connection, requested measurements, and sprocket-contact photos.
  • Roller sequence and flange map, idler supports, mounts, guards, quantities, and readable references.
  • Loose chains or assembled groups, retained components, connection parts, fasteners, and repair sides.
  • Delivery postal code, address access, unloading method, needed-by date, and machine-down status.

Leave an uncertain series or configuration unresolved until Caterpillar's serial record and the installed evidence agree. Do not publish or order from an unverified seller serial break. Confirm exact assemblies, availability, dispatch, freight, transit, return terms, and warranty coverage before teardown.

Use the Undercarriage Quote Checklist to organize your machine records, or the Track Chain Buying Guide when identifying a chain and its mating parts.

About The Caterpillar D6G Bulldozer

The Caterpillar D6G is a historical medium track-type tractor retained in the Cat Parts Store. Caterpillar's historical product information describes the D6G on an oval rather than elevated-sprocket undercarriage, and it lists a separate D6G Series 2 record. These machines serve grading, earthmoving, clearing, and support work.

Caterpillar D6G Manufacturer Reference Details
Manufacturer ReferencesCat Parts Store D6G and Caterpillar historical product information
Product ClassHistorical medium track-type tractor
Undercarriage LayoutOval track rather than elevated sprocket
Related RecordD6G Series 2 listed separately
Parts LookupComplete serial number requested
Fitment RuleConfirm series, configuration, and installed components

Reference figures describe the named series and equipment, not every machine in the family. Check the record for your own serial number and installed configuration.

Distinguishing The D6G Dozer From Other D6 Models

A D6G is not a D6D, D6E, D6H, or modern D6. Series 2 and special-application records should also remain explicit. The verified oval-track layout separates it from the elevated-sprocket D6H generation, but architecture alone does not identify each wear part.

How To Find The Right Undercarriage Parts For Your D6G

  1. Photograph the complete D6G plate and preserve all series and configuration wording.
  2. Document both oval-track frames, shoes, chains, drive surfaces, guards, and prior repairs.
  3. Count links and map rollers and idlers by side and position with mounts and supports visible.
  4. Have qualified personnel measure the wear system and inspect guides, tensioning, recoil, and alignment.
  5. Review exact assemblies, quantities, mating parts, hardware, serial fitment, freight, and unloading.

D6G Oval Track And Series 2 Records Need Separate Identification

Caterpillar identifies the D6G as an oval-track machine and also preserves D6G Series 2 information. Put that generation wording at the start of the quote.

Compare the machine record with the parts installed today. Earlier repairs may have changed chains, shoes, rollers, or drive components on one or both sides.

A chain-only proposal should document sprocket engagement and roller support. A targeted repair can be practical, but it should follow measured wear.

When the machine is down, send failure photos and the complete parts list together. Urgency should improve communication and freight planning, not remove fitment checks.

Other Caterpillar D6 Models And Series

Caterpillar D6

A D6 inquiry can cover a low-drive grading tractor or a larger high-drive production dozer.

View parts & identification

Caterpillar D6C

Use the D6C serial, rebuild history, and installed component evidence to confirm aftermarket undercarriage parts.

View parts & identification

Caterpillar D6D

Preserve D6D or D6D SR identity and verify the serial and installed design before requesting aftermarket parts.

View parts & identification

Caterpillar D6E

Keep the D6E SR designation and installed component details with the serial throughout the aftermarket quote.

View parts & identification

Caterpillar D6H

Use the full D6H or D6H XL serial and a position-labeled record of installed parts to confirm undercarriage fitment.

View parts & identification

Caterpillar D6K

A D6K track repair needs the correct installed system as well as the correct model.

View parts & identification

Caterpillar D6M

D6M kits should be quoted for the actual XL or LGP arrangement.

View parts & identification

Caterpillar D6M LGP

The D6M LGP requires a repair package that accounts for its longer track and extra support position.

View parts & identification

Caterpillar D6M XL

The D6M XL’s longer grading footprint needs a correctly sized replacement chain and the right roller layout.

View parts & identification

Caterpillar D6N

A D6N parts quote should follow its series and arrangement rather than an assumed modern successor.

View parts & identification

Caterpillar D6R

The D6R’s high-drive wear package can be quoted as individual aftermarket components or a complete kit.

View parts & identification

Caterpillar D6R LGP

A D6R LGP repair should include the right chain length and wide-shoe scope.

View parts & identification

Caterpillar D6R XL

An XL-track D6R can need a different chain package from a standard tractor.

View parts & identification

Caterpillar D6R XL (IG)

For a D6R XL (IG) request, the arrangement is part of the purchasing specification.

View parts & identification

Caterpillar D6R XR

The XR designation needs to stay attached to the D6R aftermarket quote.

View parts & identification

Caterpillar D6T

A production D6T earns its parts budget through work hours, so compare a repair scope that fits the next assignment.

View parts & identification

Fast Quotes. Fast Shipping. Less Downtime.

Send your machine, parts list, delivery ZIP code, and needed-by date. Confirm availability and shipping options for your repair.

Get A Fast Parts Quote