FAST QUOTES · FAST SHIPPING · LESS DOWNTIMEFor owner-operators, contractors & fleets

Aftermarket CASE Track Adjuster Seal Kits

Get a fast quote for CASE track adjuster seal kits. Check the installed cylinder and required seal positions before selecting the set. A pressure seal and dirt wiper have different duties, and rod or bore damage needs review before a seal-only order is approved. Review stock and shipping options for your repair.

Request A Quote

Aftermarket CASE Track Adjuster Seal Kits

Ask Dozer Undercarriage to quote aftermarket CASE track adjuster seal kits for the repair your technician has identified. CASE U-cup and wiper references identify sealing functions, but a complete aftermarket kit needs the full cylinder repair scope. The components in this category renew the specified sealing positions in a serviceable adjuster cylinder. Supplying the right replacement means comparing the application, interfaces, and assembly contents, so the price covers the parts needed to get the CASE dozer back to work.

Supporting Components

  • Pressure seals
  • Dirt wipers
  • O-rings and backup rings where used
  • Guide or wear rings where specified
  • Cylinder bore and moving sealing surface
  • Valve and recoil components outside the kit scope

CASE Track Adjuster Seal Kits Replacement Options

For a CASE job, the main request options are complete identified seal sets, individual service seals, and cylinder replacement when hard parts cannot be reused. Use the inspection to compare resealing sound hard parts versus repairing or replacing a damaged adjuster, then itemize the selected repair. Require the proposal to define each supplied seal and supporting ring rather than a kit name alone. A replacement assembled from separately quoted pieces should cover the same finished repair as a larger assembly offer, including the pieces the technician would otherwise need to transfer.

Sample OEM References For CASE Track Adjuster Seal Kits

CASE references such as R25706, D95149 illustrate the component descriptions in this category. The listed number may represent a particular side, kit, or individual service piece. Match that described scope to the repair before using it as the OEM target for an aftermarket replacement.

Check whether each number identifies a complete assembly or an individual supporting component. Confirm all included pieces when requesting a package or kit.

Sample OEM References For Track Adjuster Seal Kits — CASE
ManufacturerOEM NumberPart Description
CASER25706Track adjuster U-cup rod seal — individual seal component. Individual U-cup rod seal for the track adjuster; not a complete seal kit.
CASED95149Track adjuster piston rod wiper — individual seal component. Individual piston rod wiper for the track adjuster; not a complete seal kit.

Direct Replacement Compatibility For CASE Track Adjuster Seal Kits

Check cylinder identity, rod or piston arrangement, seal sizes and profiles, and complete kit contents when reviewing CASE OEM compatibility. Check the installed cylinder and required seal positions before selecting the set. A pressure seal and dirt wiper have different duties, and rod or bore damage needs review before a seal-only order is approved. The proposal should state the aftermarket part replacing the identified OEM item, its supplied contents, and any retained supports. A reference match is useful evidence, but the actual mounting and working interfaces still need to agree with the dozer in service.

Choosing CASE Track Adjuster Seal Kits For Your Repair

Build the CASE request around the CASE series, serial number, LT/WT/XLT/LGP configuration where recorded, and existing component references. The workshop should assess seal leakage, scored bores, damaged rods, worn guides, and valve condition and identify retained parts. Have the hard parts inspected before choosing a reseal. The kit should match the fitted cylinder, including any replacement installed during earlier work. Include a photo or readable existing number and say which position needs the repair. That makes the compatibility review more focused and gives us a parts list that can be checked against the quotation before dispatch.

Order CASE Track Adjuster Seal Kits With Fast Quotes And Shipping

Send your CASE parts list for a fast aftermarket quote, including the OEM targets, fitted assembly details, quantities, and delivery ZIP code. Flag complete seal contents, any damaged hard parts, clean repair preparation, and the technician’s schedule and the date the parts are needed. Review pricing and shipping as one repair decision. The final order should confirm supply contents, availability, dispatch timing, freight charges, and estimated delivery so the receiving arrangements support the workshop’s planned installation.

Identify Your CASE Dozer

Use these model pages to check the complete designation and running-gear details for your parts request. Replacement compatibility still needs the machine serial number and installed component references.

CASE Track Adjuster Seal Kits Replacement: Expert Planning And Workshop Tips

For CASE track adjuster seal kits, make the receiving check part of the installation plan. Establish pressure isolation and a clean sealing work area. Compare kit pieces with the assembly list before the cylinder is taken into service work. Give the technician the confirmed parts description, serial record, and retained-component list. That helps keep assembly contents and mounting decisions visible throughout the repair.

  1. Have the CASE technician follow the service information for the actual assembly. Use qualified personnel and the proper cylinder service procedure. Protect seal lips, follow the specified orientation, and avoid contamination during assembly. Check each retained mounting and supplied connection piece as work proceeds so the completed repair agrees with the quoted scope.

  2. When CASE track adjuster seal kits arrive, compare the identified replacement scope with cylinder identity, rod or piston arrangement, seal sizes and profiles, and complete kit contents. Count the included mounting or service pieces and keep any retained supports identified so the technician can check the finished assembly against the order.

Before Returning To Work

Finish the CASE job with the prescribed operational and assembly checks. Carry out the prescribed leak and track-setting checks. Save cylinder and fitted kit identification so later seal orders start from the repaired assembly. Record any changed scope so future replacement requests describe what is now fitted.

Fast Quotes. Fast Shipping. Less Downtime.

Send your machine, parts list, delivery ZIP code, and needed-by date. Confirm availability and shipping options for your repair.

Get A Fast Parts Quote