FAST QUOTES · FAST SHIPPING · LESS DOWNTIMEFor owner-operators, contractors & fleets

Aftermarket CASE Track Adjusters

Get a fast quote for CASE track adjusters. Define whether the repair needs a yoke assembly, cylinder, piston, valve, or sealing pieces. Preserve the serial record and distinguish recoil work so the delivered adjuster scope agrees with the workshop diagnosis. Review stock and shipping options for your repair.

Request A Quote

Aftermarket CASE Track Adjusters

Ask Dozer Undercarriage to quote aftermarket CASE track adjusters for the repair your technician has identified. CASE adjuster yokes may have separate right- and left-hand assembly references. An urgent quote should identify the side before a replacement is proposed. The components in this category set the idler position through the identified tensioning cylinder and supporting assembly. Supplying the right replacement means comparing the application, interfaces, and assembly contents, so the price covers the parts needed to get the CASE dozer back to work.

Supporting Components

  • Grease cylinder and bore
  • Piston or ram and sealing surfaces
  • Pressure seals and guides
  • Adjustment valve and fittings
  • Yoke or mounting connection
  • Separate recoil spring assembly where fitted

CASE Track Adjusters Replacement Options

For a CASE job, the main request options are cylinder or piston replacements, complete specified adjuster assemblies, and separately identified recoil components. Use the inspection to compare a serviceable cylinder needing seals versus damaged hard parts requiring replacement, then itemize the selected repair. Require the proposal to define the cylinder repair separately from the recoil assembly and supporting yoke. A replacement assembled from separately quoted pieces should cover the same finished repair as a larger assembly offer, including the pieces the technician would otherwise need to transfer.

Sample OEM References For CASE Track Adjusters

CASE references such as 435383A1, 435384A1, 129162A1 illustrate the component descriptions in this category. The listed number may represent a particular side, kit, or individual service piece. Match that described scope to the repair before using it as the OEM target for an aftermarket replacement.

Sample OEM References For Track Adjusters — CASE
ManufacturerOEM NumberPart Description
CASE435383A1Right-hand adjuster yoke assembly. 850L right-side adjuster assembly with piston, valve, and seals.
CASE435384A1Left-hand adjuster yoke assembly. 850L left-side adjuster assembly with piston, valve, and seals.
CASE129162A1Track adjuster assembly. Adjuster assembly with its specified cylinder and supporting components.

Direct Replacement Compatibility For CASE Track Adjusters

Check cylinder and piston or rod references, stroke-related arrangement, seals, valve, and mounting connection when reviewing CASE OEM compatibility. Define whether the repair needs a yoke assembly, cylinder, piston, valve, or sealing pieces. Preserve the serial record and distinguish recoil work so the delivered adjuster scope agrees with the workshop diagnosis. The proposal should state the aftermarket part replacing the identified OEM item, its supplied contents, and any retained supports. A reference match is useful evidence, but the actual mounting and working interfaces still need to agree with the dozer in service.

Choosing CASE Track Adjusters For Your Repair

Build the CASE request around the CASE series, serial number, LT/WT/XLT/LGP configuration where recorded, and existing component references. The workshop should assess tension loss, leakage, damaged rods or bores, valve condition, and mounting wear and identify retained parts. Use the diagnosis to distinguish cylinder sealing work from recoil service. Qualified handling is essential around retained pressure and spring energy. Include a photo or readable existing number and say which position needs the repair. That makes the compatibility review more focused and gives us a parts list that can be checked against the quotation before dispatch.

Order CASE Track Adjusters With Fast Quotes And Shipping

Send your CASE parts list for a fast aftermarket quote, including the OEM targets, fitted assembly details, quantities, and delivery ZIP code. Flag cylinder versus full-assembly scope, specialist service timing, and the parts required together and the date the parts are needed. Review pricing and shipping as one repair decision. The final order should confirm supply contents, availability, dispatch timing, freight charges, and estimated delivery so the receiving arrangements support the workshop’s planned installation.

Identify Your CASE Dozer

Use these model pages to check the complete designation and running-gear details for your parts request. Replacement compatibility still needs the machine serial number and installed component references.

CASE Track Adjusters Replacement: Expert Planning And Workshop Tips

For CASE track adjusters, make the receiving check part of the installation plan. Record assembly details from accessible markings and records. Arrange the approved isolation and support plan before any tensioning component is dismantled. Give the technician the confirmed parts description, serial record, and retained-component list. That helps keep assembly contents and mounting decisions visible throughout the repair.

  1. Have the CASE technician follow the service information for the actual assembly. Have qualified personnel follow the serial-specific procedure for pressure release, recoil handling, and cylinder installation. Avoid improvised spring restraint or identification disassembly. Check each retained mounting and supplied connection piece as work proceeds so the completed repair agrees with the quoted scope.

  2. When CASE track adjusters arrive, compare the identified replacement scope with cylinder and piston or rod references, stroke-related arrangement, seals, valve, and mounting connection. Count the included mounting or service pieces and keep any retained supports identified so the technician can check the finished assembly against the order.

Before Returning To Work

Finish the CASE job with the prescribed operational and assembly checks. Complete the specified leak and tension checks and retain the fitted cylinder and sealing references. Resolve abnormal movement before operating. Record any changed scope so future replacement requests describe what is now fitted.

Fast Quotes. Fast Shipping. Less Downtime.

Send your machine, parts list, delivery ZIP code, and needed-by date. Confirm availability and shipping options for your repair.

Get A Fast Parts Quote