FAST QUOTES · FAST SHIPPING · LESS DOWNTIMEFor owner-operators, contractors & fleets

Dozer Track Adjusters

The track adjuster and recoil assembly control track tension and absorb loads. Quotes should identify which components are needed and which can be reused. Get a fast quote and review shipping options for the parts that will put your dozer back to work.

Request A Quote

Aftermarket Track Adjusters

A track adjuster changes the idler position to establish track tension. Many dozers use a grease-operated cylinder together with a recoil spring assembly that accommodates loads. The grease adjuster and the recoil assembly are related but distinct parts. A repair can involve seals, cylinder hard parts, or a larger assembly, depending on the inspection.

Supporting Components

  • The adjuster cylinder, piston or ram, and rod move the idler arrangement.
  • Seals, wipers, backup rings, and guides belong to the applicable cylinder design.
  • A grease fitting, passage, and specified release valve provide the adjustment interface.
  • The recoil spring and its retainers or housing absorb movement in the track system.
  • Yokes, mounting pieces, and connection hardware link the tensioning assembly to the idler and frame.

Types Of Track Adjuster Parts Available

Available options depend on the machine and installed assembly. Confirm the exact design and supply scope in the proposal.

Grease Adjuster Assemblies

An adjuster assembly can include the cylinder and moving hard parts, with its seals and adjustment fittings. Verify the list of included pieces and the assembly number. A cylinder assembly may be offered separately from the recoil spring or idler supports.

Seal And Cylinder Repairs

A seal kit addresses the sealing components specified for an identified cylinder. Damaged rods, scored bores, and worn guides can require additional parts. Have the workshop establish whether seal replacement is a suitable repair before comparing kit and assembly prices.

Recoil Assemblies And Components

Recoil springs, housings, and retained assemblies have their own service requirements. They can store substantial energy. Identify the exact assembly and have qualified personnel follow the manufacturer’s procedure for inspection, removal, and repair.

Sample OEM Product Numbers

Use these example part numbers to describe your request. Confirm the full machine serial number, current assembly, quantities, and current replacement references with the supplier before ordering.

Sample OEM References For Track Adjusters
ManufacturerOEM NumberPart Description
Caterpillar7T-3697Track adjuster cylinder, 372 mm length. Cylinder component, not the full recoil package; example D8N and D8R applications.
Caterpillar3W-0643Track adjuster cylinder. Cylinder component, not the full recoil package; example D6H-family applications.
John DeereAT207649Track Adjuster Piston. Adjuster piston component, not a complete adjuster; example 450H, 550H, and 650H applications.
John DeereT73206Track Adjuster Piston. Adjuster piston component, not a complete adjuster; example 750C and 850C applications.
CASE435383A1Right-hand adjuster yoke assembly. 850L right-side adjuster assembly with piston, valve, and seals.
CASE435384A1Left-hand adjuster yoke assembly. 850L left-side adjuster assembly with piston, valve, and seals.
CASE129162A1Track adjuster assembly. Adjuster assembly with its specified cylinder and supporting components.
Komatsu14X-30-51531Idler cushion cylinder. Cylinder component for the idler tensioning system; replacement reference 14X-30-51532 requires confirmation.
Komatsu14X-30-00530Recoil spring assembly. Recoil component, not a complete track-adjuster package.
International Harvester (Historical TD Family)700173C1Hydraulic track adjuster cylinder with plate. Historical International Harvester TD-20B component. It does not establish modern Dressta or Dresser compatibility.
International Harvester (Historical TD Family)607917C1Hydraulic track adjuster piston. Historical International Harvester TD-20B component. It does not establish modern Dressta or Dresser compatibility.

How To Choose The Right Track Adjuster

Send the adjuster assembly number, complete machine identification, cylinder or ram details, and a description of the fault. Separate repeated tension loss from mechanical binding or damage to the surrounding idler supports.

Have the technician define the scope: seal kit, cylinder hard parts, complete adjuster, or recoil work. Ask which fittings, guides, retainers, and seals are included. The proposed repair should address the inspected condition of the installed assembly.

How To Order The Track Adjuster Parts You Need

Start a parts request for your dozer with the full manufacturer, model designation, serial number or PIN, and the installed component numbers. Describe the track adjuster repair, the quantity, the side or mounting position, and any parts the workshop will reuse. Add clear photographs and previous replacement records where available. Explain missing identification so the supplier can request the correct additional information.

Review the written proposal before placing an order. Confirm the part specification and any superseded number, included supporting pieces, mounting hardware, price, availability, freight, and delivery timing. Ask about warranty and return terms for the actual product. Check the ship-to address, access, and unloading needs. A quote request on this site begins the inquiry; purchase and payment arrangements are confirmed with the supplier.

Keep the confirmed numbers, quantities, and correspondence with the machine’s service records. Inspect the delivered pieces against the proposal before installation, and resolve any differences with the supplier before parts are fitted.

Parts Checks That Help Prevent Repeat Downtime

Separate the grease-cylinder repair from the recoil assembly scope. Use service records and the technician’s findings to identify the cylinder, piston or rod, seals, valve, and any supporting pieces required.

Keep readable component references and the technician’s findings with the quote request. This separates identification, wear condition, and supply scope so each can be checked. Resolve missing information before ordering and inspect the delivered parts against the agreed list before installation.

Comparing Track Adjusters Pricing And Delivery

Request pricing for the identified track adjusters and the exact quantity needed for your dozer. Include the delivery ZIP code, address type, and repair window. Ask the proposal to show the supplied assemblies, related pieces, and mounting hardware. Have the workshop identify installation tasks and any additional repair work so the parts order follows a clear work plan.

Compare freight, availability, lead time, confirmed supplied contents, and return conditions using the same component specification. For large assemblies, ask about packed weights, dimensions, and unloading requirements. Resolve any missing identification before ordering, then keep the confirmed parts numbers with the machine’s service records. Those records help the next component request describe the installed system accurately.

Track Adjuster Replacement: Expert Planning And Workshop Tips

A smooth replacement starts before dismantling. Obtain the service information for the complete machine and installed assembly, agree on the repair scope, and arrange the tools, handling equipment, qualified labor, and parts needed for your dozer. There is no universal torque value, clearance, or track-tension setting for every model. Use the applicable procedure and component instructions.

  1. Arrange qualified service for pressure and stored-energy work. Do not release, loosen, or dismantle adjustment or recoil parts simply to obtain a number. Use existing records and accessible identification until the approved procedure is established.

  2. Inspect cylinder surfaces and support parts before deciding on a seal-only repair. Record any bore, ram, or guide damage so the order includes the hard parts needed to complete the job.

  3. Keep the repair area and hydraulic or grease-contact surfaces clean under the service procedure. After assembly, complete the prescribed leak and tension checks and investigate recurring loss of tension rather than repeatedly adding grease.

Before Returning To Work

Before returning the dozer to work, have the technician complete the prescribed inspections and record the installed part numbers. Keep a baseline of the relevant wear or adjustment measurements. Recheck the assembly at the interval required by the service information, and address unusual noise, movement, leakage, or uneven wear promptly.

Fast Quotes. Fast Shipping. Less Downtime.

Send your machine, parts list, delivery ZIP code, and needed-by date. Confirm availability and shipping options for your repair.

Get A Fast Parts Quote