FAST QUOTES · FAST SHIPPING · LESS DOWNTIMEFor owner-operators, contractors & fleets

Dozer Track Adjuster Seal Kits

A track adjuster seal kit is a component repair option. Before pricing the kit, identify the cylinder and have its condition checked so the repair scope includes any damaged hard parts. Get a fast quote and review shipping options for the parts that will put your dozer back to work.

Request A Quote

Aftermarket Track Adjuster Seal Kits

A track adjuster seal kit contains the sealing pieces specified to service an identified adjuster cylinder. It may include a pressure seal, wiper, O-rings, backup rings, or guide elements, depending on the design. It does not automatically include the cylinder, ram, fittings, or recoil spring. A suitable seal repair needs serviceable hard parts and the correct assembly identification.

Supporting Components

  • Pressure seals retain the grease or working pressure within the specified cylinder arrangement.
  • Wipers help exclude dirt from the moving ram or rod.
  • O-rings and backup rings serve the locations specified in the assembly.
  • Wear rings, guides, or spacers may be included only where listed for that design.
  • The cylinder bore, ram or rod, fittings, and recoil assembly are related hard parts to inspect and quote separately when needed.

Types Of Track Adjuster Seal Kit Parts Available

Available options depend on the machine and installed assembly. Confirm the exact design and supply scope in the proposal.

Complete Seal Sets

A complete kit refers to the seals listed for a particular adjuster assembly, not every possible component in the tensioning system. Confirm its included pieces and the assembly number. Kits with similar ring counts can still use different sizes or seal designs.

Individual Seals And Supporting Pieces

Some parts catalogs list individual seals, wipers, or backup rings. These numbers can help identify the system, but a single seal is not a complete kit. Ask the workshop to identify all pieces required for the approved cylinder service.

Seal Repairs And Cylinder Replacement

Seal-only service can be considered when the cylinder and ram meet the applicable condition limits. Scored bores, damaged rods, or worn guides may require hard-part repair or assembly replacement. Compare the complete labor and parts scope before deciding on the lowest kit price.

Sample OEM Product Numbers

Use these example part numbers to describe your request. Confirm the full machine serial number, current assembly, quantities, and current replacement references with the supplier before ordering.

Check whether each number identifies a complete assembly or an individual supporting component. Confirm all included pieces when requesting a package or kit.

Sample OEM References For Track Adjuster Seal Kits
ManufacturerOEM NumberPart Description
Caterpillar520-0179Track adjuster and recoil seal kit. Seal-kit example for a D7E tensioning assembly; confirm included seals.
Caterpillar8T-2185Track adjuster U-cup seal, 71.79 mm inner diameter — seal component example. Individual adjuster seal, not a complete seal kit.
John DeereT37660Seal. Individual U-cup seal for adjuster service, not a complete seal-kit number.
John DeereAT13014Internal Oil Seal. Individual seal component for adjuster service, not a complete seal-kit number.
Komatsu622825C92Track adjuster seal kit. Track-adjuster sealing components; confirm the cylinder and complete kit contents.
International Harvester (Historical TD Family)607918C1Hydraulic track adjuster piston seal (seal-kit constituent example). Historical International Harvester TD-20B component. It does not establish modern Dressta or Dresser compatibility.
CASER25706Track adjuster U-cup rod seal — individual seal component. Individual U-cup rod seal for the track adjuster; not a complete seal kit.
CASED95149Track adjuster piston rod wiper — individual seal component. Individual piston rod wiper for the track adjuster; not a complete seal kit.

How To Choose The Right Track Adjuster Seal Kit

Use the adjuster or cylinder assembly number and the machine serial record to identify the kit. Add the ram or bore information requested by the supplier, along with any earlier assembly replacement records.

Have qualified personnel assess the cylinder and moving surfaces under the service procedure. Ask the quote to list every seal, guide, and fitting included, plus any hard parts required to address the cause of leakage.

How To Order The Track Adjuster Seal Kit Parts You Need

Start a parts request for your dozer with the full manufacturer, model designation, serial number or PIN, and the installed component numbers. Describe the track adjuster seal kit repair, the quantity, the side or mounting position, and any parts the workshop will reuse. Add clear photographs and previous replacement records where available. Explain missing identification so the supplier can request the correct additional information.

Review the written proposal before placing an order. Confirm the part specification and any superseded number, included supporting pieces, mounting hardware, price, availability, freight, and delivery timing. Ask about warranty and return terms for the actual product. Check the ship-to address, access, and unloading needs. A quote request on this site begins the inquiry; purchase and payment arrangements are confirmed with the supplier.

Keep the confirmed numbers, quantities, and correspondence with the machine’s service records. Inspect the delivered pieces against the proposal before installation, and resolve any differences with the supplier before parts are fitted.

Parts Checks That Help Prevent Repeat Downtime

Use the cylinder and assembly reference to establish kit contents. Have rod and bore condition checked first, then distinguish the complete seal set from individual wipers or pressure seals.

Keep readable component references and the technician’s findings with the quote request. This separates identification, wear condition, and supply scope so each can be checked. Resolve missing information before ordering and inspect the delivered parts against the agreed list before installation.

Comparing Track Adjuster Seal Kits Pricing And Delivery

Request pricing for the identified track adjuster seal kits and the exact quantity needed for your dozer. Include the delivery ZIP code, address type, and repair window. Ask the proposal to show the supplied assemblies, related pieces, and mounting hardware. Have the workshop identify installation tasks and any additional repair work so the parts order follows a clear work plan.

Compare freight, availability, lead time, confirmed supplied contents, and return conditions using the same component specification. For large assemblies, ask about packed weights, dimensions, and unloading requirements. Resolve any missing identification before ordering, then keep the confirmed parts numbers with the machine’s service records. Those records help the next component request describe the installed system accurately.

Track Adjuster Seal Kit Replacement: Expert Planning And Workshop Tips

A smooth replacement starts before dismantling. Obtain the service information for the complete machine and installed assembly, agree on the repair scope, and arrange the tools, handling equipment, qualified labor, and parts needed for your dozer. There is no universal torque value, clearance, or track-tension setting for every model. Use the applicable procedure and component instructions.

  1. Plan pressure and stored-energy isolation under the manufacturer’s procedure before seal work begins. Recoil assemblies and grease-adjustment components need qualified handling; identification alone is not a reason to dismantle them.

  2. Prepare a clean work area and protect new seals from contamination or damage. Confirm seal orientation, assembly tools, and installation requirements with the serial-specific service information.

  3. Inspect the bore and ram before installing the kit. Complete the specified leak and track-tension checks after repair, and retain the cylinder number and fitted seal references in the machine’s records.

Before Returning To Work

Before returning the dozer to work, have the technician complete the prescribed inspections and record the installed part numbers. Keep a baseline of the relevant wear or adjustment measurements. Recheck the assembly at the interval required by the service information, and address unusual noise, movement, leakage, or uneven wear promptly.

Fast Quotes. Fast Shipping. Less Downtime.

Send your machine, parts list, delivery ZIP code, and needed-by date. Confirm availability and shipping options for your repair.

Get A Fast Parts Quote