FAST QUOTES · FAST SHIPPING · LESS DOWNTIMEFor owner-operators, contractors & fleets

John Deere 700K Undercarriage Parts

Find aftermarket chains, rollers, idlers, sprocket segments, and shoes for your John Deere 700K. Send the serial number and installed track details so we can review direct-replacement options for your repair. Use the quote form to request pricing and coordinate shipping to your shop or jobsite.

Request A Quote

Aftermarket Parts For Your 700K Dozer

A useful 700K quote separates wear parts from the assemblies your shop will retain. Ask the technician to inspect both sides and list the parts needed by position. Include any previous conversion records. The original machine configuration helps identify an application, but the replacement must also work with the running gear now fitted.

For worn chains, compare bare chains with assembled track groups. Bare chains may suit serviceable shoes if transfer labor is practical. Check plates, grousers, mounting holes, and fasteners before choosing reuse. An assembled group quote should state shoe width, chain system, connection parts, and whether it covers one side or both.

Request lower rollers, carrier rollers, and idlers individually when the inspection supports a limited repair. Photograph the failed position, flange shape, mounts, and readable markings. For an idler, state whether supports are included or will be reused. A wheel-only price and a supported assembly price cover different work.

For a full kit, agree on a bill of materials: chains, shoes, rollers, idlers, drive segments, and required hardware. Identify guard, guide, or adjuster repairs as separate lines where needed. Complete identification supports fast quotes. Confirm actual availability, dispatch timing, freight charges, and warranty terms in the offer before setting the installation date.

Part Information For Your 700K Quote

Gather these items before requesting 700K pricing:

  • Full machine designation and serial number or PIN, with a clear plate photo. Include XLT or LGP and any other configuration detail recorded for the tractor.
  • Chain markings, shoes per side, current shoe width and type, and master connection photos. Include records identifying the installed track system.
  • OEM references or previous replacement numbers when available, quantities, side, and roller positions. For segments, state whether you need pieces, a full set, or both sides.
  • Photos of the damaged parts in place, the shop’s wear findings, and details of components staying in service. Attach the RFQ and any measured dimensions.
  • Delivery ZIP or postal code, address type, unloading equipment, needed-by date, and whether the machine is down.

If a number is missing, send both a close-up and an overall photo. We can review what further evidence is needed before a replacement is selected. Keep any uncertain measurement marked as approximate. Confirm the agreed parts list and shipping plan with the installer before the machine is dismantled.

Use the Undercarriage Quote Checklist to organize your machine records, or the Track Chain Buying Guide when identifying a chain and its mating parts.

About The John Deere 700K Bulldozer

The 700K appears in Deere’s K-Series crawler brochure alongside the 750K and 850K. That manufacturer reference documents XLT and LGP arrangements with a power-angle-tilt blade, suited to material spreading and grading work. Its undercarriage table specifies segmented sprockets and oscillating track frames. The figures below describe the brochure configurations and serve as identification checks, not universal parts-fit approval.

John Deere 700K Manufacturer Reference Details
XLT Track Gauge And Shoe Width1,778 mm (70 in.) gauge; 560 mm (22 in.) shoes
LGP Track Gauge And Shoe Width1,981 mm (78 in.) gauge; 760 mm (30 in.) shoes
Shoes Per Side40 standard; 38 Maximum Life
Track Rollers Per Side7 for both listed arrangements
Drive ArrangementSegmented sprockets

Reference figures describe the named series and equipment, not every machine in the family. Check the record for your own serial number and installed configuration.

Distinguishing The 700K Dozer From Other 700 Models

A 700 family listing can include several letter series. Keep the K suffix on your request; the 700J is a separate model identity. The brochure’s XLT and LGP versions differ in gauge and shoe width. Track-system type adds another distinction, with separate shoe counts shown for standard and Maximum Life arrangements. Confirm both configuration and system before accepting a cross-reference.

How To Find The Right Undercarriage Parts For Your 700K

  1. Identify the tractor from its machine plate. Use the identification section of the correct operator manual to locate it. Copy every character and keep the engine number separate from the machine serial.
  2. Record the installed tracks on both sides. Count shoes, measure width, and photograph chain markings and connections. Include past invoices if one side was repaired at a different time or a system was changed.
  3. Document the component and its mating parts. A chain request benefits from sprocket, roller, and idler references. Have a technician check pitch and mounting dimensions where markings are missing; wear can affect measured spacing.
  4. Review retained assemblies with the installer. Investigate loose mounts, guide damage, or unusual contact before narrowing the scope to wear parts. Describe any conflict between the fitted components and the original machine record.
  5. Check the proposed order and delivered parts against the approved specification. Confirm quantities, hardware, and connections before fitting. Use the machine’s service instructions for safe handling, fastener torque, chain assembly, and track adjustment.

Specify 700K Sprocket Segment Sets And Hardware Clearly

A segmented sprocket divides the drive teeth into replaceable sections around the drive hub. A request for two sprockets can therefore leave the supply quantity unclear. State whether you want complete segment sets for both sides, one complete side, or identified individual sections. Ask the quote to show how many pieces make up each supplied set.

Include the fitted segment reference and photographs of its bolt arrangement. Have the installer inspect the mounting faces and bolt holes, especially if a segment has worked loose. New teeth alone will not correct damaged mounting surfaces. Ask the offer to identify the fasteners supplied and any parts that must be ordered separately.

Review segment condition alongside chain-bushing wear. A chain replacement needs compatible drive contact, so give the reviewer the chain-system details even when the immediate request is only for segments. Do not assume that the same model name proves a standard-system and Maximum Life component will work together.

General inspection advice is to record uneven tooth contact, damaged guides, and repeated tension problems before ordering. These observations help a technician decide what to investigate; they do not prove a particular 700K fault. Agree on any related repair before new parts are installed, then coordinate receipt of hardware and major components so a small missing item does not hold up the job.

Fast Quotes. Fast Shipping. Less Downtime.

Send your machine, parts list, delivery ZIP code, and needed-by date. Confirm availability and shipping options for your repair.

Get A Fast Parts Quote