FAST QUOTES · FAST SHIPPING · LESS DOWNTIMEFor owner-operators, contractors & fleets

John Deere 550K Undercarriage Parts

Get aftermarket chains, lower and carrier rollers, idlers, sprockets, and track shoes for your John Deere 550K. Share the serial number, track arrangement, and installed component details so we can review direct-replacement options. Use the quote form to request pricing and shipping for the repair your shop plans.

Request A Quote

Aftermarket Parts For Your 550K Dozer

Your 550K quote can cover one failed part, a pair of chains, assembled track groups, or a complete undercarriage kit. Start with the shop’s inspection list. Mark each item as replace, inspect further, or retain. This gives the parts reviewer a clear scope and keeps an uncertain diagnosis from becoming an order for the wrong assembly.

If you plan to keep the shoes, inspect them before pricing bare chains. Look at the plates and mounting holes as well as the grousers. Have the shop allow for removing seized bolts, transferring shoes, and fitting the specified fasteners. Shoe width alone does not confirm that a retained plate will fit a proposed chain.

For assembled groups, ask the quote to state the chain system, number of shoes, shoe width and style, connection parts, and number of sides supplied. Compare that scope with a chain-only offer after adding transfer labor. Request package weights and handling details so the shop can receive and move the assemblies.

Individual rollers need position and mounting details. A photo showing the failed roller in place helps distinguish a lower roller from a carrier roller and shows nearby guards. Include its flange shape and any readable marking. For an idler, explain whether the wheel, supports, or a larger assembly is needed.

A kit should list its contents rather than rely on the word complete. Confirm chains, rollers, idlers, sprockets, shoes, and hardware line by line. Keep any adjuster or guard repairs visible in the scope. We can coordinate the quote and shipping plan; confirm actual availability, freight charges, dispatch timing, and warranty terms for the selected parts.

Part Information For Your 550K Quote

A fast quote starts with enough detail to identify both the tractor and its current running gear. Include:

  • The full 550K designation, machine serial number or PIN, and a clear plate photo. Keep engine identification separate from the machine record.
  • Standard or LGP arrangement, current shoe width, and any configuration suffix shown on your records. Include track gauge if the shop has measured it.
  • Existing chain and sprocket numbers, shoes per side, master connection photos, and records of any undercarriage conversion.
  • OEM references when available, replacement part markings, quantities, and the side and position of each requested roller or idler.
  • Component photos and inspection results. Show damaged mounting holes, guards, or running surfaces and identify which parts you intend to reuse.
  • Delivery location and ZIP code, unloading equipment, needed-by date, and whether the machine is down. Attach the shop’s RFQ if one is ready.

If records are missing, send what you have before taking the machine apart. We can review the photos and identify which dimensions or markings are still needed. Resolve those questions before approving the order, then agree on the shipment contents and receiving plan with the installer.

Use the Undercarriage Quote Checklist to organize your machine records, or the Track Chain Buying Guide when identifying a chain and its mating parts.

About The John Deere 550K Bulldozer

The 550K is part of Deere’s small K-Series crawler family with the 450K and 650K. The April 2021 manufacturer brochure documents standard and LGP versions. These machines combine hydrostatic travel with a power-angle-tilt blade for pushing and grading work. The table describes the brochure configurations and gives useful identification checks; it is not a parts interchange chart.

John Deere 550K Manufacturer Reference Details
Standard Track Gauge1,549 mm (61 in.)
LGP Track Gauge1,753 mm (69 in.)
Listed Shoe WidthsStandard: 457 mm (18 in.); LGP: 610 mm (24 in.)
Shoes Per Side40 standard and Extended Life; 37 Maximum Life
Lower Track Rollers Per Side6 for both listed arrangements

Reference figures describe the named series and equipment, not every machine in the family. Check the record for your own serial number and installed configuration.

Distinguishing The 550K Dozer From Other 550 Models

The 550 family includes more than one letter series, so retain the K when requesting parts. The existing 550J page describes a separate generation. Within the 550K, the standard and LGP entries differ in gauge and shoe width. Chain-system identification is a further check: the brochure lists different shoe counts for standard or Extended Life tracks and Maximum Life tracks. Neither a family name nor the LGP label establishes compatibility with the parts on your machine.

How To Find The Right Undercarriage Parts For Your 550K

  1. Locate the machine plate using the identification section in the correct operator manual. Photograph the full number and copy any configuration details from the machine record. Flag missing or unclear characters instead of guessing.
  2. Record each side separately. Measure the fitted shoe width and count the shoes. Photograph the chain markings, master connection, sprocket, and guards. If the two sides have different repair histories, include both sets of invoices.
  3. Confirm the track system with references and dimensions together. A technician can check pitch and mounting details where numbers are missing. Worn spacing is not a manufacturing dimension, so use measurements as evidence for review rather than as the sole basis for selection.
  4. Check retained components before approving new ones. Ask the installer to assess chain contact with the sprocket, rollers, and idlers, plus guide and mount condition. A replacement part should fit the assemblies that will remain in service.
  5. Approve an itemized offer with quantities and hardware shown. Compare delivered parts with that specification before installation. Use the proper service instructions for lifting, connecting the chain, fastener torque, and final track adjustment.

Match 550K Shoe Width To The Track Arrangement

The listed standard and LGP shoes sit on different track gauges. Gauge is the distance between the track centerlines; shoe width is the width of an individual plate. Those are separate measurements. A photo of a wide shoe cannot establish the whole arrangement, and fitting wider shoes alone does not recreate the documented LGP configuration.

If replacing damaged shoes, photograph the bolt pattern and the underside where the shoe seats on the links. Note cracks, bent plates, elongated holes, and any contact marks near guards. Ask the shop whether the damage is confined to the shoe or also affects its mounting faces. Keep that finding with the shoe request so related work is included.

For a change in shoe width, explain the ground conditions and why a change is wanted. Have the proposed combination checked for the machine arrangement, mounting pattern, and clearance before ordering. Do not use the brochure’s alternative width as approval to convert your tractor. The review must consider the actual machine and its fitted components.

When several shoes and the chains are worn, compare reusing the remaining plates with buying assembled groups. Include inspection and transfer labor, fasteners, freight, and the shop’s repair window in both estimates. General inspection advice is to investigate repeated rubbing, loose mounts, or uneven rail contact before installing new parts. These signs call for a technician’s assessment; they do not by themselves prove a specific 550K failure.

Fast Quotes. Fast Shipping. Less Downtime.

Send your machine, parts list, delivery ZIP code, and needed-by date. Confirm availability and shipping options for your repair.

Get A Fast Parts Quote