FAST QUOTES · FAST SHIPPING · LESS DOWNTIMEFor owner-operators, contractors & fleets

John Deere 1050 Undercarriage Parts

We supply aftermarket undercarriage parts for your John Deere 1050, including track chains, rollers, idlers, sprockets, and shoes. This page helps 1050 crews maintaining large dozers for production earthmoving and demanding site work identify a compatible replacement and prepare a complete parts request. Request a fast quote with your machine details and delivery needs so we can help minimize equipment downtime.

Request A Quote

Aftermarket Parts For Your 1050 Dozer

On a 1050, a complete aftermarket estimate should include the wear components and the supporting repair work identified by inspection. Itemized kits and individual replacements help you compare parts cost, installation scope, and dispatch without treating every shutdown as a chain-only job.

Our aftermarket options are selected as direct replacements for the OEM references applicable to your 1050. Matching OEM fit and dimensional specifications means checking the installed chain, mating components, mounting features, and serial application together. We help compare cost against equivalent dealer parts and review availability and shipping speed for the selected replacements.

Order an individual component or request a complete undercarriage kit. Your kit quote should name its contents: chains, lower and carrier rollers, front idlers, sprockets or segments, shoes, and required hardware, with adjuster or connection components included where specified. Tell us which assemblies your shop will retain so the price and delivery plan cover the same repair scope.

Part Information For Your 1050 Quote

Include K, P-Tier, or the exact actual generation, full PIN, and existing chain references. The 1050K example has 46 shoes and eight rollers per side. Identify any previous conversion and photograph the bogie and support arrangement.

  • Existing OEM and replacement part numbers: include readable markings, old invoices, quantities, and position-labeled photographs.
  • Full machine serial number or PIN: preserve every character, any prefix, and the complete 1050 designation. An engine serial is a separate record.
  • Serial-plate location: use the identification illustration in the operator or parts manual for your exact 1050 series. Send the plate image; if it is missing, attach machine photographs and available ownership or service records for our staff to review.
  • Configuration: Exact 1050 generation, shoe package, and bogie/support arrangement. Add measured track gauge and shoe width, shoe type, and blade or other arrangement details shown in the machine record.
  • Track details: For the 1050K reference, pitch is 215.9 mm. Confirm the installed count, master connection, shoe width, and all retained drive/support references before accepting a replacement chain.
  • Delivery information: ship-to ZIP or postal code, access or unloading requirements, whether the machine is down, and your needed-by date.

After you submit, our parts staff reviews identification and the requested scope, resolves outstanding fitment details, and prepares itemized pricing with availability and shipping options. Complete records help us turn the quote around quickly. Confirm the quote turnaround, dispatch timing, and estimated transit for your specific order; tell us at the outset if the 1050 is stopped or a technician is already scheduled.

Use the Undercarriage Quote Checklist to organize your machine records, or the Track Chain Buying Guide when identifying a chain and its mating parts.

About The John Deere 1050 Bulldozer

The 1050K is a large Deere production dozer with a 13.5 L PowerTech engine and 350 hp net rating in the cited brochure. Its dual-path hydrostatic drive and dual-bogie undercarriage support demanding material movement. The later 1050 P-Tier is a separate generation for identification. The specification table therefore names the K-series source rather than presenting one figure for the entire 1050 family.

John Deere 1050 Manufacturer Reference Details
Reference Model1050K
EnginePowerTech PSS 6135, 13.5 L
Net Power350 hp / 261 kW
Shoes / Rollers Per Side46 shoes / 8 track rollers
Track Pitch215.9 mm / 8.5 in.

Reference figures describe the named series and equipment, not every machine in the family. Check the record for your own serial number and installed configuration.

Distinguishing The 1050 Dozer From Other 1050 Models

The 1050K’s published 46-section track differs from the 950K arrangements. Its bogie system also makes the support inspection important, beyond comparing individual wheel diameters. A later P-Tier designation or a similar chain pitch cannot settle interchange; review the component references and serial-specific arrangement for the tractor being repaired.

How To Find The Right Undercarriage Parts For Your 1050

  1. Identify the tractor first. Record the complete John Deere 1050 designation and full PIN or serial, including any prefix or series. Use the identification illustration for that exact generation to locate the machine plate, and keep the engine tag separate. Send a clear plate photograph if any character is uncertain.
  2. Establish the installed configuration. Check exact 1050 generation, shoe package, and bogie/support arrangement. Record track gauge, shoe width and type, and any previous undercarriage conversion. A build record describes the original tractor; the replacement must also work with the parts currently fitted.
  3. Document the component being ordered. For the 1050K reference, pitch is 215.9 mm. Confirm the installed count, master connection, shoe width, and all retained drive/support references before accepting a replacement chain. For a shoe, add bolt spacing and plate condition; for a roller or idler, record its position, flange or tread form, and mounting dimensions. Ask a technician to take measurements where access requires service work.
  4. Check application changes before accepting a cross-reference. Give our staff the complete serial so the proposed OEM replacement reference can be checked for applicable serial breaks, revisions, and supersessions. A similar model name, pitch, or wheel diameter does not establish interchange with a sibling tractor.
  5. Confirm the complete order. Have our parts staff review unresolved markings or photographs, then agree on assemblies, quantities, supplied hardware, retained parts, and shipping. Compare new parts with the approved specification before installation, and have qualified technicians follow the correct service procedure for handling, connection, torque, and track adjustment.

Inspecting 1050 Bogie Supports Alongside Wear Parts

A heavy-dozer report should cover the supports that carry the rollers, not only the visible wheels and rails. Have the technician document bogie movement, mounting condition, guides, idler alignment, and any abnormal contact. A new roller will not by itself correct a damaged support or a frame-alignment problem.

Separate wear assemblies from structural and support repairs in the estimate. Specify connection hardware, retained shoes, and the exact kit contents, then confirm how the shop will receive and handle the shipment. This gives parts sourcing and workshop planning the same scope before the tractor is taken out of production.

Manufacturer References

Fast Quotes. Fast Shipping. Less Downtime.

Send your machine, parts list, delivery ZIP code, and needed-by date. Confirm availability and shipping options for your repair.

Get A Fast Parts Quote