FAST QUOTES · FAST SHIPPING · LESS DOWNTIMEFor owner-operators, contractors & fleets

Komatsu D85PX-18 Undercarriage Parts

Request aftermarket chains, rollers, idlers, sprocket segments, shoes, and hardware for a Komatsu D85PX-18. Preserve the PX-18 identity and distinguish the standard lubricated track from optional PLUS equipment. Use the quote form for fitment and heavy-freight planning.

Request A Quote

Aftermarket Parts For Your D85PX-18 Dozer

Komatsu specifies D85PX-18 with oscillating equalizer-bar suspension, seven lower rollers and 41 shoes per side, and a wide PX footprint. The manufacturer also offers optional extended-wear PLUS equipment, so the installed system cannot be assumed from the model alone.

Record chain markings, links, master connection, shoe width and grouser, mounting pattern, and segment engagement. If a quote proposes a different system, require a complete list of compatible shoes, rollers, idlers, segments, connections, hardware, and retained components.

Map lower and carrier rollers, idlers, caps, mounts, guards, guides, and tensioning parts by side and position. Separate worn components from equalizer-bar, pivot, recoil, mount, frame, or alignment repairs.

A complete scope may cover both track sides, rollers, idlers, drive segments, shoes, joining parts, and fasteners. Confirm approved assemblies, actual availability, packed weights, dimensions, shipment count, carrier access, unloading, returns, and warranty.

Part Information For Your D85PX-18 Quote

Give the parts team the D85PX-18 identity, system evidence, repair boundary, and heavy-shipment plan:

  • Complete D85PX-18 designation, serial, plate photo, and previous undercarriage records.
  • Both PX frames plus chains, rollers, idlers, segments, shoes, guards, guides, and damage.
  • Standard, PLUS, or unknown system; chain markings; links; connection; shoe details; and measurements.
  • Roller and idler map with side, position, flange form, mounts, caps, supports, and quantities.
  • Individual parts or groups, retained components, repair sides, hardware, and conversion boundary.
  • Destination, carrier access, unloading capacity, needed-by date, and machine-down status.

Do not treat D85EX, D85PX, standard track, PLUS, or i-model lines as interchangeable. Confirm the installed system and actual heavy shipment in writing.

Use the Undercarriage Quote Checklist to organize your machine records, or the Track Chain Buying Guide when identifying a chain and its mating parts.

About The Komatsu D85PX-18 Bulldozer

Komatsu lists D85PX-18 as a large dozer for soft-ground work. The manufacturer specification identifies oscillating equalizer-bar suspension, seven track rollers and 41 shoes per side, a 910 mm standard shoe, and lubricated track. Optional 36-inch PLUS rotating-bushing equipment is separately identified.

Komatsu D85PX-18 Manufacturer Reference Details
Manufacturer ModelKomatsu D85PX-18
SuspensionOscillating equalizer bar and pivot shaft
Track RollersSeven per side
Shoes41 per side
Standard Shoe Width910 mm in the manufacturer specification
System CautionOptional PLUS equipment must be identified

Reference figures describe the named series and equipment, not every machine in the family. Check the record for your own serial number and installed configuration.

Distinguishing The D85PX-18 Dozer From Other D85 Models

D85PX-18 differs from D85EX-18 in footprint. D85PXi-18 adds intelligent-machine-control identity. Earlier -15 machines, standard lubricated track, and optional PLUS equipment require separate records.

How To Find The Right Undercarriage Parts For Your D85PX-18

  1. Copy the exact D85PX-18 serial and every additional suffix.
  2. Photograph both frames and identify standard, PLUS, or unknown track equipment.
  3. Count links and map rollers, idlers, segments, shoes, guards, guides, and mounts.
  4. Have qualified personnel inspect wear, tension, alignment, suspension, recoil, and frame condition.
  5. Approve assemblies, retained parts, quantities, hardware, packed data, access, and unloading.

Identify Standard Or Optional PLUS Equipment On The D85PX-18

PX identifies the footprint, but it does not tell the parts team whether optional PLUS track remains installed.

Photograph joint construction and current component markings before teardown. Keep prior conversion invoices with the request.

A system change must address all mating wear parts; do not compare one chain line against an unmatched existing system.

Coordinate heavy freight only after exact assemblies and quantities are approved.

Fast Quotes. Fast Shipping. Less Downtime.

Send your machine, parts list, delivery ZIP code, and needed-by date. Confirm availability and shipping options for your repair.

Get A Fast Parts Quote