FAST QUOTES · FAST SHIPPING · LESS DOWNTIMEFor owner-operators, contractors & fleets

Komatsu D71PX-24 Undercarriage Parts

Request aftermarket chains, rollers, idlers, sprocket segments, shoes, and hardware for a Komatsu D71PX-24. Record the PX footprint, complete serial, and installed PLUS or replacement system. Use the quote form to confirm fitment and delivery.

Request A Quote

Aftermarket Parts For Your D71PX-24 Dozer

Komatsu specifies D71PX-24 with oscillating equalizer-bar suspension, eight lower rollers and 45 shoes per side, and PLUS rotating-bushing track. Commercial catalogs also advertise conventional replacements, so the installed system and proposed conversion boundary must be explicit.

For chains or assembled groups, record links, master connection, shoe width and grouser, bolt pattern, markings, and segment contact. PX and PX-wide shoe choices cannot be inferred safely from a distant photo; use the machine record and measured installed shoe.

Map lower and carrier rollers, idlers, wear plates, guards, guides, caps, mounts, and tensioning parts by side and position. Keep structural, suspension, recoil, and alignment work separate from wear components.

Define both sides, every assembly, quantity, joining piece, fastener, and retained part. Confirm exact fitment, actual availability, packed data, carrier access, unloading, returns, and warranty for the approved scope.

Part Information For Your D71PX-24 Quote

Send the D71PX-24 machine record, system evidence, component map, scope, and logistics:

  • Full D71PX-24 designation, serial, plate image, and repair or conversion records.
  • Both PX frames plus chain joints, rollers, idlers, segments, shoes, guards, guides, and damage.
  • PLUS, conventional, or unknown system; links; connection; shoe width; grouser; and markings.
  • Roller and idler position map with side, flange form, mounts, caps, supports, and quantities.
  • Components or groups requested, retained items, repair sides, hardware, and conversion boundary.
  • Delivery postal code, access limits, unloading equipment, needed-by date, and downtime status.

Do not mix PLUS and conventional components or apply EX equipment to a PX machine without a written compatible scope. Confirm the final system and shipment before scheduling work.

Use the Undercarriage Quote Checklist to organize your machine records, or the Track Chain Buying Guide when identifying a chain and its mating parts.

About The Komatsu D71PX-24 Bulldozer

Komatsu lists D71PX-24 as a mid-size hydrostatic crawler dozer. The manufacturer specification identifies oscillating equalizer-bar suspension, eight track rollers and 45 shoes per side, single-grouser shoes, and PLUS rotating-bushing track. PX shoe-width choices create a wide footprint for softer ground.

Komatsu D71PX-24 Manufacturer Reference Details
Manufacturer ModelKomatsu D71PX-24
SuspensionOscillating type with equalizer bar and pivot shafts
Track RollersEight per side
Shoes45 per side
Track SystemKomatsu PLUS rotating-bushing system
ConfigurationPX wide-footprint arrangement

Reference figures describe the named series and equipment, not every machine in the family. Check the record for your own serial number and installed configuration.

Distinguishing The D71PX-24 Dozer From Other D71 Models

D71PX-24 differs from D71EX-24 in footprint, while PXi and EXi add intelligent-machine-control identity. Earlier generations and conventional replacements remain separate fitment questions.

How To Find The Right Undercarriage Parts For Your D71PX-24

  1. Copy D71PX-24 and the complete serial, including any i or E0 identity.
  2. Photograph both frames and identify PLUS, conventional, or unknown equipment.
  3. Count links and map eight roller positions, idlers, segments, shoes, guards, and guides.
  4. Have qualified personnel inspect wear, tension, alignment, mounts, recoil, and suspension points.
  5. Confirm the complete system, quantities, hardware, freight units, access, and unloading.

Keep The D71PX-24 Footprint And Track System Together

PX and PX-wide arrangements affect the footprint, while PLUS identifies a track-system feature. Preserve both in the request.

If a conventional replacement is proposed, require the quote to identify every mating part that changes and every component that remains.

Do not copy a seller serial range or published quantity without checking the actual machine and installed count.

Use final packed weights, dimensions, shipment count, access, and unloading capacity for freight planning.

Fast Quotes. Fast Shipping. Less Downtime.

Send your machine, parts list, delivery ZIP code, and needed-by date. Confirm availability and shipping options for your repair.

Get A Fast Parts Quote