FAST QUOTES · FAST SHIPPING · LESS DOWNTIMEFor owner-operators, contractors & fleets

Komatsu D51 Undercarriage Parts

We supply aftermarket undercarriage parts for your Komatsu D51, including track chains, rollers, idlers, sprockets, and shoes. This page helps D51 grading and site-preparation fleets arranging track-system repairs identify a compatible replacement and prepare a complete parts request. Request a fast quote with your machine details and delivery needs so we can help minimize equipment downtime.

Request A Quote

Aftermarket Parts For Your D51 Dozer

A D51 quote can cover a single damaged component or a planned wear replacement. Aftermarket direct replacements are most useful when EX/PX identity and the actual chain system are settled before comparing kit prices and shipping.

Our aftermarket options are selected as direct replacements for the OEM references applicable to your D51. Matching OEM fit and dimensional specifications means checking the installed chain, mating components, mounting features, and serial application together. We help compare cost against equivalent dealer parts and review availability and shipping speed for the selected replacements.

Order an individual component or request a complete undercarriage kit. Your kit quote should name its contents: chains, lower and carrier rollers, front idlers, sprockets or segments, shoes, and required hardware, with adjuster or connection components included where specified. Tell us which assemblies your shop will retain so the price and delivery plan cover the same repair scope.

Part Information For Your D51 Quote

Provide the full D51 designation, generation, serial, and any machine-control suffix. The D51PX-24 reference has 44 shoes and seven track rollers per side. Record chain markings and any change from the original arrangement.

  • Existing OEM and replacement part numbers: include readable markings, old invoices, quantities, and position-labeled photographs.
  • Full machine serial number or PIN: preserve every character, any prefix, and the complete D51 designation. An engine serial is a separate record.
  • Serial-plate location: use the identification illustration in the operator or parts manual for your exact D51 series. Send the plate image; if it is missing, attach machine photographs and available ownership or service records for our staff to review.
  • Configuration: Exact D51 EX/PX or i designation and generation number. Add measured track gauge and shoe width, shoe type, and blade or other arrangement details shown in the machine record.
  • Track details: Confirm count, pitch, SALT or other installed construction, master joint, and shoe fastening dimensions. The PX-24 reference lists 710 mm shoes and 1,880 mm gauge; verify your tractor.
  • Delivery information: ship-to ZIP or postal code, access or unloading requirements, whether the machine is down, and your needed-by date.

After you submit, our parts staff reviews identification and the requested scope, resolves outstanding fitment details, and prepares itemized pricing with availability and shipping options. Complete records help us turn the quote around quickly. Confirm the quote turnaround, dispatch timing, and estimated transit for your specific order; tell us at the outset if the D51 is stopped or a technician is already scheduled.

Use the Undercarriage Quote Checklist to organize your machine records, or the Track Chain Buying Guide when identifying a chain and its mating parts.

About The Komatsu D51 Bulldozer

Komatsu lists D51 EX/PX variants in its smaller dozer range, including machine-control versions. The referenced D51PX-24 has a rigid undercarriage and a sealed-and-lubricated chain in the manufacturer specification. Its track footprint is useful for grading and site preparation on softer ground. The table is a PX-24 reference, while other D51 arrangements retain separate fitment requirements.

Komatsu D51 Manufacturer Reference Details
Reference ModelD51PX-24
UndercarriageRigid; sealed-and-lubricated chain reference
Shoes / Rollers Per Side44 shoes / 7 track rollers
Reference Shoe Width710 mm / 28 in.
Reference Track Gauge1,880 mm

Reference figures describe the named series and equipment, not every machine in the family. Check the record for your own serial number and installed configuration.

Distinguishing The D51 Dozer From Other D51 Models

The D51PX-24 reference differs from the smaller D39PX-24 in both shoe and roller counts. EX and PX descriptions also preserve configuration information inside the same family. Neither automated blade-control equipment nor a similar external layout establishes wear-part interchange; verify chain and support references for the complete designation.

How To Find The Right Undercarriage Parts For Your D51

  1. Identify the tractor first. Record the complete Komatsu D51 designation and full PIN or serial, including any prefix or series. Use the identification illustration for that exact generation to locate the machine plate, and keep the engine tag separate. Send a clear plate photograph if any character is uncertain.
  2. Establish the installed configuration. Check exact D51 EX/PX or i designation and generation number. Record track gauge, shoe width and type, and any previous undercarriage conversion. A build record describes the original tractor; the replacement must also work with the parts currently fitted.
  3. Document the component being ordered. Confirm count, pitch, SALT or other installed construction, master joint, and shoe fastening dimensions. The PX-24 reference lists 710 mm shoes and 1,880 mm gauge; verify your tractor. For a shoe, add bolt spacing and plate condition; for a roller or idler, record its position, flange or tread form, and mounting dimensions. Ask a technician to take measurements where access requires service work.
  4. Check application changes before accepting a cross-reference. Give our staff the complete serial so the proposed OEM replacement reference can be checked for applicable serial breaks, revisions, and supersessions. A similar model name, pitch, or wheel diameter does not establish interchange with a sibling tractor.
  5. Confirm the complete order. Have our parts staff review unresolved markings or photographs, then agree on assemblies, quantities, supplied hardware, retained parts, and shipping. Compare new parts with the approved specification before installation, and have qualified technicians follow the correct service procedure for handling, connection, torque, and track adjustment.

Keeping D51 Grading Support Consistent After A Repair

An uneven grading result deserves a mechanical inspection as well as a control-system review. Ask the workshop to document rail height, roller condition, idler guidance, and abnormal contact before deciding which wear components to replace. A new isolated part may not resolve uneven support elsewhere in the track frame.

Use those findings to define retained and replaced components in the quote. Include both-side quantities and the shoe-transfer decision if chains are involved. A clearly bounded order helps us review compatibility and delivery while the technician plans the adjustments and checks required by the correct service instructions.

Fast Quotes. Fast Shipping. Less Downtime.

Send your machine, parts list, delivery ZIP code, and needed-by date. Confirm availability and shipping options for your repair.

Get A Fast Parts Quote