FAST QUOTES · FAST SHIPPING · LESS DOWNTIMEFor owner-operators, contractors & fleets

John Deere 850K Undercarriage Parts

Request John Deere 850K aftermarket track chains, rollers, front idlers, sprocket segments, and shoes. Include the full serial number, track arrangement, and blade type. Use the quote form to check replacement options for the parts on your dozer and plan the complete repair.

Request A Quote

Aftermarket Parts For Your 850K Dozer

An 850K request should name both the track and blade arrangement. Deere's K-Series brochure separates OSD and PAT versions, with standard, WT, XLT, WLT, and LGP entries across its undercarriage table. The LGP label appears in both blade groups. Ask for a direct-replacement aftermarket option checked against the full machine record and the installed system.

Price chains on their own when the existing shoes pass inspection. Send the shoe width, grouser type, hole pattern, and chain identification. Have the shop include shoe transfer and specified new fasteners in its estimate. If plates are cracked or mounting holes are damaged, request assembled groups as a separate option so the parts and labor scopes are clear.

For a roller repair, describe each position rather than asking for an unspecified roller set. Record flange form and mounting details. Compare wear on the rail and nearby rollers with the failed unit. For idlers, photograph the wheel and supports and state which pieces need replacement. A wheel price and a supported assembly price can cover different work.

For a larger rebuild, request an itemized package with both track groups or chains, rollers, idlers, segments, and hardware. Include guides, guards, and tensioning repairs where the inspection calls for them. Confirm availability and shipping for that exact package. A kit name alone does not show what is included or whether the retained parts are suitable.

Part Information For Your 850K Quote

Keep the configuration details with the parts list so the quote does not depend on the 850K badge alone:

  • Complete 850K PIN or serial number, identification-plate photo, and any prior undercarriage invoices.
  • STD, WT, XLT, WLT, or LGP designation, plus OSD or PAT blade arrangement.
  • Shoe width, gauge if requested, actual link count on each side, and installed chain-system identification.
  • Component numbers, master connection photos, roller position and flange details, and idler support photos.
  • Parts and quantities, one side or two, hardware required, and components the shop plans to reuse.
  • Ship-to ZIP code, unloading equipment, needed-by date, Machine Is Down status, and any booked repair slot.

If the arrangement is uncertain, attach clear views of both sides and the blade rather than guessing a suffix. The parts review can identify the next measurement or record needed. Ask for fitment, price, availability, and delivery details together before authorizing the order.

Use the Undercarriage Quote Checklist to organize your machine records, or the Track Chain Buying Guide when identifying a chain and its mating parts.

About The John Deere 850K Bulldozer

Deere's 2013 K-Series brochure describes the 850K as a hydrostatic crawler for grading and earthmoving. It lists OSD and PAT blade versions with several track arrangements. The reference table below focuses on track identity rather than engine figures, because gauge, length, and installed components are more useful when preparing an undercarriage request.

John Deere 850K Manufacturer Reference Details
Reference Edition700K / 750K / 850K brochure, 2013
OSD Track GaugesStandard: 1,880 mm; WT: 2,032 mm; LGP: 2,184 mm
PAT Track GaugesXLT: 2,083 mm; WLT: 2,235 mm; LGP: 2,388 mm
Shoes Per SideOSD standard and WT: 40; other listed arrangements: 45
Lower Rollers Per SideOSD standard and WT: 7; other listed arrangements: 8
Listed Track Pitch203 mm (8 in.) across these brochure arrangements

Reference figures describe the named series and equipment, not every machine in the family. Check the record for your own serial number and installed configuration.

Distinguishing The 850K Dozer From Other 850 Models

An 850J or 850L listing needs a separate application check; the family number does not establish interchange. Within the 850K brochure, equal shoe widths can occur on different gauges. In particular, the two LGP entries have different gauges despite sharing a 45-shoe count. Supply the blade arrangement and full PIN alongside measurements so the parts team can identify which configuration the request concerns.

How To Find The Right Undercarriage Parts For Your 850K

  1. Verify the full 850K identity from the machine plate. Keep every character of the PIN and use the matching operator manual to locate the plate if needed.
  2. Record blade type and track designation from the build record, then compare them with the machine. Note changes made by a previous owner and attach any conversion records.
  3. Count current links and measure shoe width. Have the shop provide gauge or mounting dimensions when requested. A worn pitch measurement alone should not be used to select a chain.
  4. Photograph chain markings, the master joint, segments, rollers, and idlers. Ask for the serial-specific parts reference to be checked against the actual component interfaces.
  5. Use a wear report to choose the repair scope, then confirm assemblies, quantities, joining parts, and hardware. Qualified personnel should use the service instructions for lifting, tightening, and adjustment.

Why An 850K LGP Quote Also Needs The Blade Arrangement

The brochure's OSD LGP and PAT LGP entries show why LGP is not a complete parts description. Use the table as a prompt to gather evidence, not as a universal fitment chart. If your machine's records conflict with its measurements, identify the installed track frames and prior parts before buying a replacement group.

Shoe width also leaves questions open. Check the plate style, mounting holes, corner shape, and clearances against the proposed chain and frame. A wide shoe can resemble another option while using a different assembly. Ask the parts team which dimensions they need before the shop spends time measuring or removing components.

For uneven wear, keep left- and right-side observations separate. Record guide contact, damaged flanges, loose mounts, leaking rollers, and idler position. Ask the shop to assess alignment and tension as well as wear. These are general inspection points; they do not diagnose a particular 850K fault from a photograph.

When comparing two quotes, align their units. Count chains by side, shoes by piece, and segments by the stated group. Check whether hardware and assembly labor are included. Then compare freight and delivery plans for the same contents, with enough detail for the shop to receive and inspect the order before work starts.

Fast Quotes. Fast Shipping. Less Downtime.

Send your machine, parts list, delivery ZIP code, and needed-by date. Confirm availability and shipping options for your repair.

Get A Fast Parts Quote