FAST QUOTES · FAST SHIPPING · LESS DOWNTIMEFor owner-operators, contractors & fleets

CASE 850M Undercarriage Parts

Request aftermarket chains, rollers, idlers, sprockets, and shoes for your CASE 850M dozer. Include the full serial number, LT, WT, or LGP arrangement, and evidence of the installed SALT or Max-Life track system. Use the quote form to confirm fitment and coordinate parts and freight.

Request A Quote

Aftermarket Parts For Your 850M Dozer

The 850M has several listed blade and track arrangements, so a general 850M request leaves important questions open. CASE names LT, WT, and LGP options, standard SALT chain, and optional Max-Life track. Record those details with the serial number. Avoid treating a catalog entry for one width or footprint as proof of fit for another.

For a chain-only repair, identify the shoes that will transfer and have the shop inspect their plates, holes, grousers, and fastener seats. Include the transfer labor and new specified hardware. If shoes are also worn, request complete groups and state the width, shoe type, master connection, and whether the assemblies arrive ready for the shop's planned installation procedure.

A roller set should be defined from the actual machine. Map positions on both frames, distinguish flange types, and note mounts or guards that need work. For an idler, list the wheel and support pieces separately. For sprockets, provide the chain-system identification and wear findings. Mating surfaces should be reviewed together before accepting a partial repair.

A complete replacement request should itemize two sides of track components plus every supporting part the inspection selected. Include adjuster seals or assemblies, guides, guards, and hardware where required. Ask for direct-replacement aftermarket options for the confirmed system, then verify availability, dispatch timing, freight, and product-specific warranty terms before booking the outage.

Part Information For Your 850M Quote

Give the parts team a complete 850M identity and a repair list tied to the machine inspection:

  • Full CASE 850M serial number, identification-plate image, and prior parts or conversion records.
  • LT, WT, or LGP designation, blade arrangement, shoe width, and gauge if the parts team requests it.
  • Standard SALT or Max-Life track, chain markings, links per side, pitch if measured correctly, and master joint.
  • OEM references when known, quantities, roller positions, idler supports, sprocket photos, and damaged mounts.
  • Loose chains or assembled groups, one side or both, retained shoes, connection parts, and hardware scope.
  • Delivery ZIP code, site type, unloading equipment, needed-by date, and whether a repair crew is waiting.

Send clear photographs instead of estimating a missing number. The quote can identify which measurement or record is still needed. Fast service depends on a resolved fitment and a clear scope; confirm each offered part, stock status, dispatch plan, transit estimate, and freight handling before purchase.

Use the Undercarriage Quote Checklist to organize your machine records, or the Track Chain Buying Guide when identifying a chain and its mating parts.

About The CASE 850M Bulldozer

CASE markets the 850M for grading and earthmoving with multiple track and blade configurations. Its current North American page lists 120 hp and a 22,381 lb reference operating weight. Standard undercarriage equipment includes hydraulic adjusters, SALT chain, and lubricated track and carrier rollers and idlers. These figures are product references, not universal parts specifications.

CASE 850M Manufacturer Reference Details
Manufacturer ReferenceCASE 850M North American product information
Published Net Power120 hp / 90 kW
Published Operating Weight22,381 lb / 10,152 kg
Standard Track EquipmentSALT chain; lubricated rollers and idlers
Listed ArrangementsLT, WT, and LGP blade options
Listed Track OptionCASE Max-Life track

Reference figures describe the named series and equipment, not every machine in the family. Check the record for your own serial number and installed configuration.

Distinguishing The 850M Dozer From Other 850 Models

Keep 850M separate from 850G, 850H, 850K, 850L, and other 850-series machines. The M suffix narrows the generation, while LT, WT, LGP, and track-system identity narrow the configuration. Machine-control equipment does not identify chains or rollers. Use the tractor serial and installed parts for the replacement decision.

How To Find The Right Undercarriage Parts For Your 850M

  1. Identify the tractor with its complete serial number and plate photograph. Preserve the M suffix and keep any engine serial number in a separate field.
  2. Document LT, WT, or LGP, blade arrangement, and installed shoes. Compare machine records with the current equipment and flag previous conversions.
  3. Record chain-system name, actual link count, master connection, shoe width, and visible references. Label rollers and idler parts by side and position.
  4. Have qualified personnel measure wear and inspect guides, adjusters, frame mounts, sprocket contact, and support components under safe service conditions.
  5. Check the proposed order against the inspection. Confirm assemblies, quantities, mating parts, hardware, packed shipment details, and delivery timing.

850M Wide-Track And Low-Ground-Pressure Orders Need More Than Shoe Width

WT and LGP are useful configuration labels, but shoe width alone cannot settle the track group. Record gauge, current chain markings, link count, mounting pattern, and the complete serial. If a used machine has mixed records, photograph the entire track frame and let the supplier request targeted measurements.

A wider shoe changes leverage on the chain and support system. That does not mean a wide shoe caused a particular fault, but it makes a whole-system inspection worthwhile. Check bent plates, loose hardware, guide contact, roller flanges, and frame clearances before transferring old shoes to new chains.

If a proposed chain is for standard SALT while the machine has Max-Life track, stop and resolve the system. Ask whether the offer preserves the installed arrangement and which sprocket or other mating pieces it requires. Do not combine components from two systems based on appearance or price.

Plan freight around the chosen assembly level. Loose chains, loose shoes, and finished groups can arrive in different packages and require different unloading equipment. Ask for actual weights and dimensions, then make the receiving plan part of the repair schedule so the machine does not wait after the shipment reaches the site.

When the 850M works in abrasive material, wet clay, or demolition debris, describe those conditions in the request. They do not determine a part number, but they give the shop context for packed material, shoe damage, seal leakage, and unusual wear patterns. Clean the undercarriage before inspection where it can be done safely. Photograph both wide views and close details after cleaning. Clear evidence helps distinguish ordinary wear from damaged mounts or guards that should be repaired before new components begin carrying load.

If the quote includes only rollers or an idler, ask the shop whether the remaining rails are suitable for the new tread surfaces. If it includes chains, ask whether the existing sprockets and idlers can remain. The supplier cannot replace a technician's measurements, but the request should show that mating parts were considered. Write the retained components into the order so a selective repair is evaluated as a system decision rather than an isolated part purchase.

Fast Quotes. Fast Shipping. Less Downtime.

Send your machine, parts list, delivery ZIP code, and needed-by date. Confirm availability and shipping options for your repair.

Get A Fast Parts Quote